High-Speed Cutter baumannperfecta 92

Cuttronic allows you to create your own cutting programs. CIP3/4 data that is in conformity with the relevant standards can be directly transferred from the pre-press stage to the machine control where it will be processed. This does not require any additional PC. You can use a USB stick, an Ethernet port (LAN) or a wireless device (WLAN) to transfer such CIP3/4 data to the machine.

This cutting program generator is an additional Cuttronic plug-in. You can use it for externally revising your cutting programs and integrate them into your workflow.

The integration of the cutting process into a superior MIS serves for efficient planning and calculation of the production process.

PERFECTA carbide-tipped knives are ideal for the processing of various materials. Compared with standard HSS knives, carbide-tipped knives are extremely resistant and guarantee longer lifetimes. We also offer the corresponding cutting sticks that match to the knives.

When you cut pressure-sensitive paper or film adhesive residues can stick to the knife. The knife cleaning device - a strip of felt soaked with some releasing agent and located in the clamp - moistens the knife back before each cut, thus preventing adhesives from sticking to the knife. For a clamp provided with such a knife cleaning device, you should use a special knife with a non-stick back.

Premature knife starting and releasing the clamp from the pile after the knife has completed the cut serve for optimizing the cutting cycle. Thus, repetitions can be made at a time that is up to 25 per cent shorter.

When particularly hard materials such as aluminium offset printing plates are being cut a lot of heat is generated along the cutting edges. This can lead to fusion or burring. To guarantee a perfect cut even for especially hard and brittle materials the cutting speed can be reduced. This means slowing down the main motor speed from 1500 rpm to 1000 rpm. Alternatively, you can control the cutting speed in an infinitely variable manner through a potentiometer or in individual steps you select on the touch screen. In this connection, both the cutting width and the pile height may be restricted.

Enlarged side tables offer more room and space for working on the guillotine. This is, above all, of advantage for loading and unloading or for buffering and packaging the material just cut.

This novel air bed technology ensures smooth and gentle handling and enables you to easily move your stock over the table. No longer using the previous valves with their sealing balls guarantees particularly gentle handling of the material without leaving any marks on it. These new micro-perforated air tables are provided with some 350 openings per square metre. They can be connected to a pressurized-air supply system.

Simple four-side trimming or many small bleed cuts produce a lot of waste that must be removed during cutting. This is what the automatic waste removal unit is intended for. During the cutting process, the front table opens, and the waste automatically separates from the material cut off and is disposed of into a container or by a conveyor located under the table. The front table opening speed can be chosen in an infinitely variable manner. A lowerable front table (P 92, P 115, P 132) along the cutting line is an important instrument if you want to collect small cut piles, for example, onto pieces of board. A vacuum produced in the lowerable front table can help you to fix the piece of board you want to pile the finished material onto.

The working height can be changed to 950 mm.

PERFECTA high-speed guillotines have a closed acrylic glass hood as a standard feature. To facilitate cleaning of the rear table and the knife back, the machines can be provided with a hinged alternative for the rear table.

This is to limit the clamp lift after cutting. This facility is efficient for low or medium pile heights. This clamp stroke limitation facility is especially suitable for cutting jobs that include repetitions.

This false clamp ensures improvement in cutting extremely small formats such as business cards. The minimum cut is 47 mm. The control system will automatically recognize the minimum dimension possible.

The foam pad serves for compensating height differences in the stock along the cutting line, for example, in wavy or particularly hard materials such as plastics. Thus, the clamping force will distribute uniformly over the entire cut. This guarantees precise cutting even of hard or uneven materials.

Bulky materials such as corrugated cardboard or foam can suffer damage when being cut as a result of too high a clamping pressure. The clamping pressure minimizer prevents such damage.

This swivel-type model is a modified version of the standard backgauge. It serves for compensating the position of skew prints. For this purpose, the backgauge can swivel up to 3 mm around a defined vertical axis. Its swivel can be controlled from the machine touch screen. This function can be integrated into cutting programs.